The jsonschema2xsd command converts a JSON Schema document to an XML Schema document that conforms with the rules of the W3C XSD 1.0 and 1.1 specifications.
raptorxml jsonschema2xsd [options] JSONSchemaFile |
•The JSONSchemaFile argument is the JSON Schema file to convert.
•Use the --schema-conversion-output option to specify the location of the generated XSD file.
Example
Example of the jsonschema2xsd command:
•raptorxml jsonschema2xsd --schema-conversion-output=c:\MyXMLSchema.xsd c:\MyJSONSchema.json
RaptorXML (and RaptorXMLServer for administration commands) on Windows raptorxml (and raptorxmlserver for administration commands) on Windows and Unix (Linux, Mac) * Note that lowercase (raptorxml and raptorxmlserver) works on all platforms (Windows, Linux, and Mac), while upper-lower (RaptorXML) works only on Windows and Mac. * Use forward slashes on Linux and Mac, backslashes on Windows. |
On Windows systems: When spaces or special characters occur in strings (for example in file or folder names, or company, person or product names), use quotes: for example, "My File". Note, however, that a backslash followed by a double-quotation mark (for example, "C:\My directory\") might not be read correctly. This is because the backslash character is also used to indicate the start of an escape sequence, and the escape sequence \" stands for the double-quotation mark character. If you want to escape this sequence of characters, use a preceding backslash, like this: \\". To summarize: If you need to write a file path that contains spaces or an end backslash, write it like this: "C:\My Directory\\". |
Options
Options are listed in short form (if available) and long form. You can use one or two dashes for both short and long forms. An option may or may not take a value. If it takes a value, it is written like this: --option=value. Values can be specified without quotes except in two cases: (i) when the value string contains spaces, or (ii) when explicitly stated in the description of the option that quotes are required. If an option takes a Boolean value and no value is specified, then the option's default value is TRUE. Use the --h, --help option to display information about the command.
These are options for validating the source JSON Schema document. --additional-schema = FILE Specifies URIs of an additional schema document. The additional schema will be loaded by the main schema and can be referenced from the main schema by the additional schemas id or $id property. |
--disable-format-checks = true|false Disables the semantic validation imposed by the format attribute. Default value is false. Note: Boolean option values are set to true if the option is specified without a value. |
--jsonschema-format = json|yaml Specifies the format in which the JSON Schema is written: JSON or YAML. Default is json. |
--jsonschema-version = draft04|draft06|draft07|2019-09|2020-12|oas-3.1|latest|detect Specifies which version of the JSON Schema specification draft version to use. Default is detect. |
--strict-integer-checks = true|false Specifies whether the stricter integer checks of draft-04 should be used with later schemas—where integer checks are looser. For example, 1.0 is not a valid integer in draft-04, but is a valid integer in later drafts. This option has no effect for draft-04 schemas. The default value of the option is false. Note: Boolean option values are set to true if the option is specified without a value. |
|
These are options to specify details of the JSON Schema to XSD conversion. --at-to-attributes = true|false If set to true, then properties prefixed with @ in the JSON Schema document are converted to attributes in the generated XSD document. The default is true. Note: Boolean option values are set to true if the option is specified without a value. |
--consider-format = true|false If set to true, datatypes in the source schema are converted, if possible, to the corresponding type in the target schema. The default value is false. Note: Boolean option values are set to true if the option is specified without a value. |
--dollar-to-text = true|false If set to true, then $-prefixed properties in the JSON Schema document are converted to text in the generated XSD document. The default is true. Note: Boolean option values are set to true if the option is specified without a value. |
--ignore-comments = true|false If set to true, ignores properties in the source JSON Schema named '#'. The default is true. Note: Boolean option values are set to true if the option is specified without a value. |
--ignore-pi-properties = true|false If set to true, ignores properties in the source JSON Schema document that start with '?'. The default is true. Note: Boolean option values are set to true if the option is specified without a value. |
--ignore-xmlns-properties = true|false If set to true, ignores properties in the source JSON Schema document that start with '@xmlns'. The default is true. Note: Boolean option values are set to true if the option is specified without a value. |
--ignore-xsi-properties = true|false If set to true, ignores properties in the source JSON Schema document that start with '@xsi'. The default is true. Note: Boolean option values are set to true if the option is specified without a value. |
--o, --schema-converson-output = FILE Sets the path and name of the file to which the result of the conversion is sent. |
|
--error-format = text|shortxml|longxml Specifies the format of the error output. Default value is text. The other options generate XML formats, with longxml generating more detail. |
--error-limit = N | unlimited Specifies the error limit with a value range of 1 to 9999 or unlimited. The default value is 100. Processing stops when the error limit is reached. Useful for limiting processor use during validation/transformation. |
--info-limit = N | unlimited Specifies the information message limit in the range 1-65535 or unlimited. Processing continues if the specified info limit is reached, but further messages are not reported. The default value is 100. |
--help Displays help text for the command. For example, valany --h. (Alternatively the help command can be used with an argument. For example: help valany.) |
--listfile = true|false If true, treats the command's InputFile argument as a text file containing one filename per line. Default value is false. (An alternative is to list the files on the CLI with a space as separator. Note, however, that CLIs have a maximum-character limitation.) Note that the --listfile option applies only to arguments, and not to options. Note: Boolean option values are set to true if the option is specified without a value. |
--log-output = FILE Writes the log output to the specified file URL. Ensure that the CLI has write permission to the output location. |
--network-timeout = VALUE Specifies the timeout in milliseconds for remote I/O operations. Default is: 40000. |
--recurse = true|false Used to select files within sub-directories, including in ZIP archives. If true, the command's InputFile argument will select the specified file also in subdirectories. For example: "test.zip|zip\test.xml" will select files named test.xml at all folder levels of the zip folder. References to ZIP files must be given in quotes. The wildcard characters * and ? may be used. So, *.xml will select all .xml files in the (zip) folder. The option's default value is false. Note: Boolean option values are set to true if the option is specified without a value. |
--verbose = true|false A value of true enables output of additional information during validation. Default value is false. Note: Boolean option values are set to true if the option is specified without a value. |
--verbose-output = FILE Writes verbose output to FILE. |
--version Displays the version of RaptorXML Server. If used with a command, place --version before the command. |
--warning-limit = N | unlimited Specifies the warning limit in the range 1-65535 or unlimited. Processing continues if this limit is reached, but further warnings are not reported. The default value is 100. |
|
--catalog = FILE Specifies the absolute path to a root catalog file that is not the installed root catalog file. The default value is the absolute path to the installed root catalog file (<installation-folder>\Altova\RaptorXMLServer2025\etc\RootCatalog.xml). See the section, XML Catalogs, for information about working with catalogs. |
--user-catalog = FILE Specifies the absolute path to an XML catalog to be used in addition to the root catalog. See the section, XML Catalogs, for information about working with catalogs. |
--enable-globalresources = true|false Enables global resources. Default value is false. Note: Boolean option values are set to true if the option is specified without a value. |
|
